Miele PT 5186 Operating And Installation Instructions page 13

~
In many programmes, the heating phase is followed by a cooling
down phase to ensure that the items are not too hot to handle when
you remove them (this also avoids the danger of the laundry
self-igniting). The programme is not finished until the cooling down
phase has been completed.
Ensure that you always wait until the end of the programme before
removing the laundry.
~
Warning: Do not switch the appliance off before the end of the
drying programme. If this was done and the laundry was then
removed immediately it could give off a great amount of heat.
~
Fabric conditioner and similar products must be used according
to the instructions on the manufacturer's packaging.
~
Benzine, petrol, paraffin or any easily flammable liquid must not
be stored or used near the tumble dryer. Fire and explosion risk.
~
Do not allow air contaminated with chlorine, fluorine or other
vapours containing solvents to get into the tumble dryer stack. Fire
hazard.
~
For appliances with stainless steel surfaces:
The stainless steel surfaces must not come into contact with liquid
cleaning and disinfecting agents which contain chlorine or sodium
hypochlorite. These agents can have a corrosive effect on stainless
steel.
Aggressive vapours containing chlorine can also be corrosive.
Do not store containers of these agents near the appliance.
Warning and Safety instructions
13