Table of Contents
Advertisement
Problem solving guide
Many malfunctions and faults that can occur in daily operation can be easily
remedied. You can save time and money in many cases, as you do not need to call
the Miele Customer Service Department.
Information to help you rectify faults yourself can be found at www.miele.com/ser-
vice.
The following tables are designed to help you to find the cause of a malfunction or a
fault and to resolve it.
Indicator lights or information on the time display triggered when a
programme is cancelled
Problem
The indicator light
comes on after a pro-
gramme has been can-
celled and a signal
sounds.
and another number
combination flash after a
programme has been
cancelled, a signal
sounds
: lights up and the
programme has been
cancelled, a signal
sounds
48
Cause and remedy
The condensed water container is full or there is kink
in the drain hose.
To switch off the indicator light, open and close
the door (with the tumble dryer switched on).
Empty the condensed water container.
Check the drain hose.
See "Cleaning and care".
No obvious cause.
Switch the dryer off and then on again.
Start a programme.
If the programme is cancelled again and an error mes-
sage appears, there is a fault. Contact the Miele Ser-
vice Department.
The laundry is unevenly distributed or has rolled up.
Disentangle the laundry and remove a few items, if
necessary.
Switch the dryer off and then on again.
Start a programme.
Advertisement
Table of Contents
