Venting More Than One Dryer Via The Same Ducting System - Miele PT 7186 Vario Operating And Installation Instructions

Venting more than one dryer
via the same ducting system
,
For each dryer there must be
one non-return flap R installed
directly on the main venting duct.
The items required for this are
available as optional accessories
(see right).
,
Otherwise condensation could
trickle back into the dryer causing
damage and endangering its
electrical safety.
When installing 3 to max. 5 dryers,
pipe diameter D must be increased.
Number Magnification factor for the pipe
of dryers diameter from Table II
3 1.25
4 - 5 1.5
Installation - extraction ducting
1 Connection to the main venting duct
2 Miele non-return flap*
3 Additional Miele adapter*
4 Miele flexible ducting hose*
^ Push the non-return flap (2) all the
way into the adapter (3).
51