View from the side
763 mm = 30 1/16"
1020 mm = 40 3/16"
1100 mm = 43 5/16"
Rear view
a Mains connection cable
b Slot for communication module
c Air inlet vents
d Exhaust socket C 4" (100 mm)
View from above
50 mm = 2"
700 mm = 27 9/16"
1248 mm = 49 1/8"
Installation on a raised plinth
A range of Miele plinths are available
as optional accessories.
,
If the tumble dryer is to be
installed on an existing plinth, the
dryer must be secured against
slippage (see below, under
"Installing the tumble dryer").
Payment system
The dryer can be fitted with a Payment
system (optional accessory).
This must be connected and
programmed by a Miele Service
technician.
,
Coins / tokens must be removed
from the coin box regularly,
otherwise it will become blocked.
Installation
41