Miele PT 7186 Vario Operating And Installation Instructions page 35

Problem
The program does
not start and the
display is dark.
The display is dark
and the Start button
is flashing slowly.
The display is in a
different language.
The Start button is
flashing when a
program is being
selected.
The interior drum
lighting does not
come on.
Frequently asked questions
Possible cause
There is no power to
the dryer.
The display has
switched off
automatically to save
energy.
A different language
has been selected.
The flashing indicates
that a program can be
started.
The lighting switches
off automatically (to
save energy).
Remedy
– Is the dryer switched on?
– Is the door closed properly?
– Has the fuse or circuit
breaker tripped?
When the power comes back
on after a power cut, confirm
with OK and start the program
again.
The display and the jog shuttle
will light up when one of the
buttons is pressed.
Set the language you want. The
flag symbol J will guide you.
Once the program has started,
the Start button stops flashing
and lights up constantly.
– It will switch on again after
the door has been closed
and then opened.
– If the lamp needs to be
replaced, follow the
instructions in "Changing the
lamp" at the end of this
section.
35