Miele PT 7186 Vario Operating And Installation Instructions page 17

c Select a program
^ Turn the dryer on by pressing the
On/Off K button in.
Program chart
– See separate booklet
"Commissioning, Program chart and
Settings".
You can select a program either by:
1. using the appropriate shortcut button
to select one of the four programs
listed in the display ("favorites"), or
2. selecting a program from the
Program selection menu (turn A and
press B).
Select Low temperature or Timer if
required
^ If required, you can then select Low
temperature and/or the Timer (Delay
start time) from the relevant
sub-menu.
Payment system
If your tumble dryer has a payment
system, the amount of credit required
will appear in the display.
Opening the door or canceling the
program after it has started may
cause loss of credit (depending on
how the tumble dryer was set up).
d Start the program
The Start button will flash as soon as a
program can be started.
^ Press the Start button.
The Start button will now light up.
– Prog. running will appear in the
display, followed by Drying and the
program duration.
– With sensor drying programs the
drying level reached e.g. Machine
iron ... Hand iron...
etc. will appear in the display later
on.
Once drying is in progress, you can
press one of the direct select buttons:
– Button E Timer to call up the
current time of day and the estimated
end time of the program.
– Button F Save to save the current
program as a favorite.
– Button G Cancel to cancel the
current program.
Quick Guide
17