Miele PT 7186 Vario Operating And Installation Instructions page 18

Quick Guide
Program duration/Estimated time
remaining
When a program is selected, the
estimated duration will appear in the
display. Please be aware that it is only
an estimate!
The following factors all affect the
estimated time remaining: residual
moisture content after spinning; type of
fabric; size of load; room temperature;
fluctuations in power supply.
The electronics assess conditions in the
appliance and adjust the estimated
time remaining for a more accurate
reading. Because of this, the time
displayed can alter during the course of
a program.
Before the end of a program
In many programs the heating phase is
followed by the cooling down phase:
Cooling down will appear in the display.
The program is not finished until the
cooling down phase has been
completed.
Do not switch the tumble dryer off
before the drying program has
finished.
18
e Remove the laundry when the
program has finished
,
The laundry must not be
removed from the dryer before the
drying program has finished. The
cooling down phase must be
completed.
If hot laundry items are stacked or
packed they could spontaneously
combust.
Anti-crease (if selected) and Finish will
appear in the display to indicate that
the program has finished.
During the anti-crease phase the drum
will continue to turn at intervals until the
laundry is removed. This helps to
prevent laundry creasing.
^ Open the door.