Mounting The Bike Handle - Stihl FS 260 C Instruction Manual

Mounting the Bike Handle

Mounting Bike Handle with Swivelling
Handle Support
2
1
The machine is supplied with the clamp
moldings (1) mounted to the
handlebar (2).
Mounting the Control Handle
Take out the screw (3) and remove
N
the nut (4) from the control
handle (5).
FS 260 C, FS 360 C
Line up control handle (5) in relation
N
to handlebar (2): Throttle trigger (6)
must point toward the gearbox and
the clamp screw (7) toward the
engine.
3
5
4
5
6
2
7
8
2
5
4
8
Holding the control handle (5) in
N
that position, push it on to the end of
the handlebar (2) and line up the
holes (8).
Fit the nut (4) in the control
N
handle (5), insert the screw (3) and
tighten it down firmly.
Assembling the Handle Support
To assemble the swivelling handle
support it is necessary to fit a spring in
the clamps and secure them to the
handle support on the machine.
English
3
15