Mounting The Bike Handle - Stihl FS 300 Instruction Manual

4 Mounting the Bike Handle

WARNING
For safety reasons only the cutting attachments
and deflectors and/or limit stops within one line
of the table may be combined with one another.
No other combinations are permitted because of
the risk of accidents!
3.2 Cutting attachments
3.2.1 Mowing heads
1 STIHL AutoCut 46-2
2 STIHL DuroCut 40-4
3 STIHL TrimCut 41-2
4 STIHL TrimCut 42-2
5 STIHL PolyCut 41-3
3.2.2 Metal cutting tools
6 Grass cutting blade 250-32
(250 mm dia.)
7 Brush knife 305-2 Spezial
(305 mm dia.)
8 Brush knife 300-3
(300 mm dia.)
9 Shredder blade 270-2
(270 mm dia.)
10 Scratcher tooth circular saw blade 200
(Ø 200 mm)
11 Circular saw blade 200-22 chisel tooth
(4119), circular saw blade 200-22 HP chisel
tooth (4000)
12 Chisel tooth circular saw blade 225
(225 mm dia.)
WARNING
Non-metal brush knives, shredder blades and
circular saw blades are not approved.
3.3 Guards, limit stops
Deflectors
13 Deflector for mowing heads only
14 Deflector with
15 Skirt and blade for mowing heads only
16 Deflector without skirt and blade, for metal
mowing attachments 3 to 5
17 Deflector for shredder blades
0458-579-8721-B
Limit Stops
18 Limit stop for 200 mm circular saw blades
19 Limit stop for 225 mm circular saw blades
3.4 Shoulder straps
20 Shoulder strap must be used
21 Full harness may be used
22 Full harness must be used
4 Mounting the Bike Handle
► Hold the lower clamp (1) steady.
► Unscrew and remove the clamping screw (2).
The clamps are loose once the clamping
screw has been removed.
► Remove the upper clamp (3) from the lower
clamp.
English
2
3
1
55