Maintenance And Repairs - Stihl FS 260 C Instruction Manual

English
FS 360 C-E
Displacement: 37.7 cc
Bore: 40 mm
Stroke: 30 mm
Engine power to 1.7 kW (2.3 bhp)
ISO 8893: at 8,500 rpm
Idle speed: 2,800 rpm
Cut-off speed (rated): 12,500 rpm
Max. output shaft
speed (cutting
attachment): 9,000 rpm
Ignition System
Electronic magneto ignition
Spark plug (resistor
type): NGK CMR6H
Electrode gap: 0.5 mm
This spark ignition system meets all
requirements of the Canadian
Interference-Causing Equipment
Regulations ICES-002.
Fuel System
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity:
FS 260 C-E Z: 750 cc (0.75 l)
FS 360 C-EM Z: 750 cc (0.75 l)
48
Weight
Dry, without cutting attachment and
deflector
FS 260 C-E Z:
FS 360 C-E Z:
Overall length
without cutting attachment
FS 260 C-E Z:
FS 360 C-E Z:
Features
C Convenience features
E Easy2Start
Z Fireproof equipment

Maintenance and Repairs

Users of this machine may only carry out
the maintenance and service work
7.7 kg
described in this user manual. All other
8.5 kg
repairs must be carried out by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
1685 mm
regularly given the opportunity to attend
1790 mm
training courses and are supplied with
the necessary technical information.
When repairing the machine, only use
replacement parts which have been
approved by STIHL for this power tool or
are technically identical. Only use high-
quality replacement parts in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original
STIHL replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and the STIHL parts symbol K
(the symbol may appear alone on small
parts).
FS 260 C, FS 360 C