Stihl FS 260 C Instruction Manual page 19

Adjusting the Handlebar
Opening the wing screw
Raise the grip of the wing screw to
N
the upright position.
Turn the wing screw
N
counterclockwise until the handle
support can be moved.
Move the handlebar to the required
N
position.
FS 260 C, FS 360 C
Closing the wing screw
Turn the wing screw clockwise as
N
far as stop.
Fold the grip of the wing screw down
N
so that it is flush.
Swiveling the Handlebar
Transport position
2
7
Loosen the wing screw (7) and
N
unscrew it until the handlebar (2)
can be turned clockwise.
Turn the handlebar 90° and then
N
swing the handles down.
Tighten down the wing screw (7)
N
firmly.
Working position
Reverse the sequence described
N
above to swing the handles up and
turn the handlebar
counterclockwise.
English
17