Upnp - Panasonic E-37-V Operation Manual

Parameter
Interval
Health mail
enable
Email test

4.1.10 UPnP

It allows you to establish the mapping relationship between the LAN and the public network.
Here you can also add, modify or remove UPnP item. For UPnP on different routers, you must disable
UPnP function. See Figure 4-24.
In the Windows OS, From Start->Control Panel->Add or remove programs. Click the "Add/Remove
Windows Components" and then select the "Network Services" from the Windows Components Wizard.
Click the Details button and then check the "Internet Gateway Device Discovery and Control client" and
"UPnP User Interface". Please click OK to begin installation.
Enable UPnP from the Web. If your UPnP is enabled in the Windows OS, the network camera can auto
detect it via the "My Network Places".
Under manual mode, you can modify external port. Under auto mode, select idle port for auto port
mapping without user modification.
Function
The send interval ranges from 0 to 3600 seconds. 0 means
there is no interval.
Please note system will not send out the email immediately
when the alarm occurs. When the alarm, motion detection or
the abnormity event activates the email, system sends out the
email according to the interval you specified here. This
function is very useful when there are too many emails
activated by the abnormity events, which may result in heavy
load for the email server.
Please check the box here to enable this function.
The system will automatically sent out a email once to test the
connection is OK or not .Before the email test, please save
the email setup information.
44