Table of Contents
Advertisement
Please refer to the following sheet for detailed information.
Parameter Function
Enable
Relay-out
Relay out
delay
Send
email
SD Card
Capacity
Limit
When device is offline or IP conflicts, the abnormal alarm is similar with case of SD card error.
Check to alarm when SD card is abnormal.
Check to enable relay-out alarm.
The alarm output can delay for the specified time after alarm stops. The
value ranges from 10s to 300s.
Note:
No SD card, capacity warning, SD card error, relay-out delay all start
from alarm occurs.
After you enabled this function, the system can send out email to alarm
the specified user.
This function is invalid when network is offline or IP conflict occurs.
User can set SD card capacity that is left free. When SD card space left
is smaller than this limit, alarm occurs.
Figure 4-35
55
Advertisement
Table of Contents
