Upnp; Snmp - Panasonic WV-V6430L Operating Instructions Manual

Parameter
Health Mail
Update Period (interval)
Email Test

UPnP

7.3.6.
It allows you to establish the mapping relationship between the LAN and the public network.
Here you can also add, modify or remove UPnP item. For UPnP on different routers, you must disable
UPnP function. See Figure 7-28.
In the Windows OS, From [Start] → [Control Panel] → [Add or remove programs]. Click the "Add/Remove
Windows Components" and then select the "Network Services" from the Windows Components Wizard.
Click the [Details] button and then check the "Internet Gateway Device Discovery and Control client" and
"UPnP User Interface". Click the [OK] button to begin installation.
Enable UPnP from the Web. If your UPnP is enabled in the Windows OS, the network camera can auto
detect it via the "My Network Places".
Under manual mode, you can modify external port. Under auto mode, select idle port for auto port mapping
without user modification.

SNMP

7.3.7.
The [SNMP] interface is shown as in Figure 7-29 and Figure 7-30.
The SNMP allows the communication between the network management work station software and the
proxy of the managed device.
Check the box here to enable this function.
This function allows the system to send out the test email to check the
connection is OK or not.
Check the box to enable this function and then set the corresponding
interval.
System can send out the email regularly as you set here.
The system will automatically sent out an email once to test the
connection is OK or not. Before the email test, save the email setup
information.
Figure 7-28
Function
48