Sound Adjustment; Adjusting The Sound - Sony FST-ZX100D Operating Instructions Manual

Hide thumbs Also See for FST-ZX100D:

Table of Contents

Press REC PAUSE/START.

"REC" flashes in the display.

Deck B stands by for recording.

Press DIRECTION repeatedly to select

"g" to record on one side or "j"

(or "RELAY") to record on both sides.

Press REC PAUSE/START.

"REC" lights up in the display.

Recording starts.

Start playing the source to be

recorded.

To stop recording

Press x.

Notes

• When you press REC PAUSE/START, the sound

field is automatically changed to LINK if the current

sound field is SBS MULTI, A.F.D. AUTO, PRO

LOGIC, PLII MOVIE, PLII MUSIC, V.M.DIM or

2CH STEREO and to HP 2CH if the current sound

field is HP VIRTUAL.

• You cannot listen to other sources while recording.

Tips

• When recording from the reverse side:

After step 1 of "Recording onto a tape manually"

(page 55), press TAPE A/B repeatedly until "TAPE

B" appears in the display. Press nN repeatedly

until the TAPE B reverse side indicator lights up to

start playback of the reverse side. Press x at the

point you want to start recording.

• When recording on both sides:

Be sure to start from the front side. If you start from

the reverse side, recording stops at the end of the

reverse side.

• When recording from the radio:

If noise is heard while recording from the radio,

move the respective antenna to reduce the noise.

• When recording from a disc onto a tape manually:

You can press . or > repeatedly to select the

tracks during recording pause mode (after step 4 and

before step 6 of "Recording onto a tape manually"

(page 55)).

• When recording from the tape:

If you set the direction to "j" (or "RELAY")

when the tapes you use have different lengths, the

tape in each deck reverses independently.

Downloaded From Disc-Player.com Sony Manuals