Sony FST-ZX100D Operating Instructions Manual page 52

4
Press ENTER.
A preset number flashes in the display.
The stations are stored from preset
number 1.
5
Press PRESET +/– repeatedly to select
the preset number you want.
6
Press ENTER.
"Complete!" appears in the display. The
station is stored.
7
Repeat steps 1 to 6 to store other
stations.
Manual tuning preset
You can manually tune in and store the
frequency of your favourite stations.
1
Press FUNCTION +/– repeatedly to
select "TUNER FM" or "TUNER AM"
(or press TUNER/BAND on the unit
repeatedly to select "FM" or "AM").
2
Press TUNING +/– repeatedly to tune in
the station you want.
3
Press MENU.
"Memory?" flashes in the display.
52 GB
Downloaded From Disc-Player.com Sony Manuals
Preset number
4
Press ENTER.
A preset number flashes in the display.
The stations are stored from preset
number 1.
5
Press PRESET +/– repeatedly to select
the preset number you want.
6
Press ENTER.
"Complete!" appears in the display. The
station is stored.
7
Repeat steps 1 to 6 to store other
stations.
Other operations
To Do this
Tune in a station Follow the procedure described
with a weak signal in "Manual tuning preset"
(page 52).
Stop scanning Press x.
during automatic
tuning
Cancel presetting Press MENU.
To change the AM tuning interval
(except for Saudi Arabian and
Russian models)
The factory setting for AM tuning interval is
9 kHz (or 10 kHz for same areas).
Use the buttons on the unit for the operation.
1
Press TUNER/BAND repeatedly to select
"AM".
2
Press ?/1 to turn off the system.
3
Hold down ENTER and then press ?/1 to
turn on the system.
"AM 9k STEP" or "AM 10k STEP" appears
in the display.
When you change the interval, all the AM preset
stations are erased. To reset the interval, repeat
the same procedure.
Preset number