Specifications - Sony FST-ZX100D Operating Instructions Manual

When using a tape longer than
90 minutes
The tape is very elastic. Do not change the tape
operations such as playback, stop and fast-winding etc.
frequently. The tape may get entangled in the tape
deck.
Cleaning the tape heads
Clean the tape heads after every 10 hours of use. Be
sure to clean the tape heads before you start an
important recording or after playing an old tape. Use a
separately sold dry-type or wet-type cleaning tape. For
details, refer to the instructions of the cleaning tape.
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that
have contact with the tape after every 20 to 30 hours of
use with a separately sold demagnetizing tape. For
details, refer to the instructions of the demagnetizing
tape.

Specifications

Amplifier section
FST-ZX100D/LBT-ZX100D
The following are measured at AC 120, 127, 220,
240V 50/60 Hz
DIN power output (rated): 130 W + 130 W
Continuous RMS power output (reference)
Front speaker:
Center speaker:
Surround speaker:
Subwoofer:
88 GB
Downloaded From Disc-Player.com Sony Manuals
(6 ohms at 1 kHz, DIN)
170 W + 170 W
(6 ohms at 1 kHz, 10%
THD)
80 W
(16 ohms at 1 kHz, 10%
THD)
170 W + 170 W
(6 ohms at 1 kHz, 10%
THD)
180 W (8 ohms at 100 Hz,
10% THD)
FST-ZX80D/LBT-ZX80D
The following are measured at AC 120, 127, 220,
240V 50/60 Hz
DIN power output (rated): 155 W + 155 W
Continuous RMS power output (reference)
Front speaker:
Center speaker:
Surround speaker:
MHC-GN1000D
The following are measured at AC 120, 127, 220,
240V 50/60 Hz
DIN power output (rated): 125 W + 125 W
Continuous RMS power output (reference)
Front speaker:
Center speaker:
Surround speaker:
Subwoofer:
Inputs
VIDEO INPUT (phono jacks):
TV/SAT AUDIO IN L/R (phono jacks):
MIC 1 or 2 (phone jack): Sensitivity 1 mV,
(6 ohms at 1 kHz, DIN)
200 W + 200 W
(6 ohms at 1 kHz, 10%
THD)
80 W
(16 ohms at 1 kHz, 10%
THD)
200 W + 200 W
(6 ohms at 1 kHz, 10%
THD)
(6 ohms at 1 kHz, DIN)
170 W + 170 W
(6 ohms at 1 kHz, 10%
THD)
70 W
(6 ohms at 1 kHz, 10%
THD)
70 W + 70 W
(6 ohms at 1 kHz, 10%
THD)
210 W (8 ohms at 100 Hz,
10% THD)
VIDEO: 1 Vp-p, 75 ohms
AUDIO L/R: Voltage
250 mV, impedance 47
kilohms
Voltage 250 mV/450 mV,
impedance 47 kilohms
impedance 10 kilohms