Time - Tenda F357 User Manual

1. Enable: Check/uncheck to enable/disable the DMZ host feature.
2. Port: This is the management port to be open to outside access.
The default setting is 8080. Do NOT change it unless instructed by
your ISP.
3. IP Address: Here you can specify the IP Address Range for remote
management (When set to 0.0.0.0, the device becomes remotely
accessible to all the PCs on Internet or other external networks).
4. OK: Click to activate your settings.
Note:
1. To access the device via port 8080, enter "http://x.x.x.x:8080"
where "x.x.x.x" represents the the device's Internet IP address
and 8080 is the remote admin port. Assuming the device's
Internet IP address is 220.135.211.56, then, simply replace the
"x.x.x.x" with "220.135.211.56" (namely,
http://220.135.211.56:8080).
2. Leaving the IP address field at "0.0.0.0" makes the device
remotely accessible to all the PCs on Internet or other external
networks; populating it with a specific IP address, say,
218.88.93.33, makes the device only remotely accessible to the
PC at the specified IP address.

6.6 Time

Wireless N301 Easy Setup Router
71 .