Bandwidth Control - Tenda F357 User Manual

3 Bandwidth Control

3.1 Bandwidth Control
Use this section to manage bandwidth allocation to devices on your
LAN. If there are multiple PCs behind your router competing for
limited bandwidth resource, then you can use this feature to specify
a reasonable amount of bandwidth for each such PC, so that no one
will be over stuffed or starved to death.
1. Enable Bandwidth Control: Check or uncheck the box to Enable
or disable the bandwidth control feature.
2. IP Address: Specify the same IP address (say, 100, 100) or two
different IP addresses (say, 100, 110) in both boxes to specify a
single IP address or an IP range to which the current bandwidth
control rule will apply.
3. Upload/Download: Select to control bandwidth over data upload
or download.
4. Bandwidth Range: Specify an upload/download bandwidth
range limit on specified PC(s). The unit is KByte/s. 1M=128KByte/s.
Note that maximum upload/download bandwidth should not
Wireless N301 Easy Setup Router
.
51