Physical Installation - Tenda F357 User Manual

2 Physical installation

1. Connect one end of the included power adapter to the device and plug the
other end into a wall outlet nearby.(Using a power adapter with a different
voltage rating than the one included with the device will cause damage to
the device)
2. Connect one of the LAN ports on the Device to the NIC port on your PC
using an Ethernet cable.
3. Connect the Ethernet cable from Internet side to the WAN port on the
device. If it is connected to the telephone line, please link the telephone
line to the MODEM and connect the MODEM to the WAN port on the
device.
Wireless N301 Easy Setup Router
4 .