Mac Clone - Tenda F357 User Manual

connection type.
2. PPPoE User Name: Enter the User Name provided by your ISP.
3. PPPoE Password: Enter the password provided by your ISP.
4. MTU: Maximum Transmission Unit. DO NOT change it from the
factory default value unless necessary.
5. Service Name: Description of PPPoE connection. Leave blank
unless otherwise required.
6. Server Name: Description of server. Leave blank unless
otherwise required.
7. Address Mode: Select "Dynamic" if you don't get any IP info from
your ISP, otherwise select "Static". Consult your ISP if you are not
clear.
8. IP Address: Enter the IP address provided by your ISP. Consult
your ISP if you are not clear.
9. Subnet mask: Enter the subnet mask provided by your ISP.

1.3 MAC Clone

Some Internet service providers (ISPs) require end-user's MAC
address to access their network. This feature copies the MAC
address of your network device to the router.
1. MAC Address: Configure device's WAN MAC address.
2. Clone MAC Address: Click to copy your PC's MAC address to the
device as a new WAN MAC address.
3. Restore Default MAC: Reset device's WAN MAC to factory default.
Wireless N301 Easy Setup Router
.
28