Routing Table - Tenda F357 User Manual

1. Destination Network IP Address: Specify a single IP address, say,
172.17.0.100, or an IP net segment, .say, 192.168.88.0.
2. Subnet Mask: Specify a Subnet Mask that corresponds to the
specified destination IP.
3. Gateway: Specif the IP address for next hop.
4. OK: Click to activate your settings.
Note:
1. Gateway must be on the same IP net segment as device's
LAN/WAN IP address.
2. Subnet Mask must be entered 255.255.255.255 if destination IP
address is a host.
3. Subnet Mask must be entered accordingly if destination IP
address represents an IP network segment. It must correspond to
the specified IP address. For example, for IP address of 10.0.0.0,
you may enter a subnet mask of 255.0.0.0.

4.6 Routing Table

This page displays the device core routing table which lists
destination IP, subnet mask, gateway, hop count and interface.
Wireless N301 Easy Setup Router
.
60