Service Devices; Product Specific Devices; General Devices - Nokia RM-627 Service Manual

RM-627
Service Devices and Service Concepts

Service devices

Product specific devices

The table below gives a short overview of service devices that can be used for testing, error analysis, and
repair of product RM-627. For the correct use of the service devices, and the best effort of workbench setup,
please refer to various concepts.

General devices

The table below gives a short overview of service devices that can be used for testing, error analysis, and
repair of product RM-627. For the correct use of the service devices, and the best effort of workbench setup,
please refer to various concepts.
Issue 1
FS-145
• FS-145 is equipped with a clip interlock system
• provides standardised interface towards Control Unit
• provides RF connection
• multiplexing between USB and FBUS media, controlled by VUSB
MJ-264
MJ-264 is meant for component level troubleshooting.
The jig includes an RF interface for GSM and WCDMA. In addition, it has
the following features:
• Provides mechanical interface with the engine module
• Provides galvanic connection to all needed test pads in module
• Connector for control unit
• Access for USB connector
SS-88
The camera removal tool SS-88 is used to remove/attach the camera
module from/to the camera socket of the phone PWB.
COMPANY CONFIDENTIAL
Copyright © 2010 Nokia. All rights reserved.
Flash adapter
Module jig
Camera removal tool
Page 2 – 5