Product Code Change - Nokia RM-627 Service Manual

Next actions
After a successful rewrite, you must retune the phone completely by using
Important:

Product code change

Context
• When Product Code change with Tucson is successfully performed, phone variant will be changed. Data
for the new variant is extracted from Nokia System, and programmed in the phone.
• After successful change, phone specific information in Nokia systems will match the new variant, and it
can be used for e.g. certificate restoring. If you perform several product code changes, Nokia system will
always be up to date with the latest successful event.
• Failed / incomplete actions will not change the phone specific information in Nokia systems.
• This function can be performed with or without flashing the phone with correct software, selection can
be made by checking / unchecking the tick box on Phoenix UI.
The procedure for product code change is the following:
Steps
1. Connect phone and scan product, read phone information to check communication with phone
Tools -> Product Code Change .
2. Open
3. Provide Tucson password and PIN code which have been delivered to you by email. Please note that
characters are case sensitive.
4. Select product code of new variant from list. If the product code you want is not shown, please install
correct data package including the variant.
Page 3 – 62
Perform all tunings: RF, BB, and UI.
COMPANY CONFIDENTIAL
Copyright © 2010 Nokia. All rights reserved.
BB Troubleshooting and Manual Tuning Guide
Phoenix tuning functions.
RM-627
Issue 1