Preparing For A Remote Configuration Of The G450 Via A Modem; Next Steps; Using Avaya Iw And Giw - Avaya G450 Quick Start For Hardware Installation

Prepare for configuration
9. The settings you configured are displayed, and you are prompted for confirmation.
If you confirm the settings, they are saved and the G450 reboots.
●
If you do not confirm the settings, you are prompted to re-configure them. If you enter y, the
●
parameters are presented again for configuration.
10. Connect the Ethernet port to the network to enable remote access to the gateway. A remote technician
can now further configure the gateway using the CLI.

Preparing for a remote configuration of the G450 via a modem

If you need to prepare the G450 for a remote configuration via a modem, you must attach a modem and
enable it using the GIW.
Note:
If you have an Avaya Service contract, no configuration is necessary for Services personnel
Note:
to remotely access the gateway through a USB modem. Simply connect the modem to a
USB port and plug in a loop start dial tone line into it, and a remote technician can dial in to
the G450 and complete the configuration using the CLI interface.
Note:
You must provide the loop start dial tone for the modem to dial in to the Media Gateway.
Note:
1. Click Continue until the Modem Type Selection screen appears.
2. Select the type of modem you are using, and click Continue.
3. In the Modem Configuration screen, enter the modem parameters. If you are configuring a USB
modem and do not have an Avaya Service contract, select Enable CHAP Authentication and enter
the CHAP secret key.
4. Click Continue until you exit the Gateway Installation Wizard.
5. Connect the modem that you specified in Step 2 and plug in a loop start dial tone line into it .
6. Dial in to the modem to ensure that it is set up correctly.
7. A remote technician can now dial in to the G450 and complete the configuration using the
script-config CLI command to run the installation script.

Next steps

Using Avaya IW and GIW

The full configuration process is performed using the Avaya Installation Wizard or Gateway Installation
Wizard interface. For more detailed information about IW and GIW:
See the online help for IW and GIW at http://support.avaya.com/avayaiw.
●
Review Job Aid: Avaya Installation Wizard, 555-245-754, and Job Aid: Avaya Gateway Installation
●
Wizard, 555-245-756.
32 Quick Start for Hardware Installation: Avaya G450 Media Gateway