Monitoring The Running Status Of Ip Performance - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - IP Service
Procedure
l
l
l
l
l
----End

3.3.2 Monitoring the Running Status of IP Performance

Context
In routine maintenance, you can run the following command in any view to view the running
status of IP performance.
Procedure
l
l
l
l
l
l
l
l
l
l
l
l
l
Issue 02 (2009-08-06)
Run the reset ip statistics [ interface interface-type interface-number ] command in the
user view to clear the statistics on IP traffic.
Run the reset ip socket monitor[ task-id task-id socket-id socket-id ] command in the
user view to clear the information about the socket monitor.
Run the reset tcp statistics command in the user view to clear the statistics on TCP traffic.
Run the reset udp statistics command in the user view to clear the statistics on UDP traffic.
Run the reset rawlink statistics command in the user view to clear the Rawlink statistics.
Run the display tcp status [ [ task-id task-id ] [ socket-id socket-id ] | [ local-ip ipv4-
address ] [ local-port local-port-number ] [ remote-ip ipv4-address ] [ remote-port
remote-port-number ] ] command to check the TCP connection status.
Run the display tcp statistics command to check the statistics on TCP traffic.
Run the display udp statistics command to check the statistics on UDP traffic.
Run the display ip statistics command to check the statistics on IP traffic.
Run the display ip socket [ monitor ] [ task-id task-id socket-id socket-id | sock-type
socket-type ] command to check information about the created IPv4 socket.
Run the display icmp statistics command to check the statistics on ICMP traffic.
Run the display rawlink statistics command to check the Rawlink statistics.
Run the display fib [ slot-id ] command to check the FIB table on the LPU.
Run the display fib [ slot-id ] [ vpn-instance vpn-instance-name ] [ verbose ] [ | { begin
| exclude | include } regular-expression ] command to check information about the FIB
table.
Run the display fib [ vpn-instance vpn-instance-name ] acl acl-number [ verbose ]
command to check information about the FIB entries that match ACL rules in a certain
format.
Run the display fib [ vpn-instance vpn-instance-name ] interface interface-type interface-
number command to check information about the FIB entries with the outgoing interface
as a specified interface.
Run the display fib [ vpn-instance vpn-instance-name ] ip-prefix prefix-name
[ verbose ] command to check information about the FIB entries that match a specified IP
prefix list.
Run the display fib [ slot-id ] [ vpn-instance vpn-instance-name ] destination-address1
[ destination-mask1 ] [ longer ] [ verbose ] command to check information about the FIB
entries that match destination IP addresses in a specified range.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 IP Performance Configuration
3-9