Checking The Configuration; Maintaining Dhcp; Clearing Dhcp Statistics; Monitoring The Running Status Of Dhcp - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - IP Service
----End

2.4.3 Checking the Configuration

Prerequisite
The configurations of requesting the DHCP server to release an IP address of a client are
complete.
Procedure
l
----End

2.5 Maintaining DHCP

This section describes how to maintain DHCP.

2.5.1 Clearing DHCP Statistics

2.5.2 Monitoring the Running Status of DHCP

2.5.1 Clearing DHCP Statistics
Context
The DHCP statistics cannot be restored after you clear them. So, confirm the action before you
use the command.
Procedure
Step 1 Run the reset dhcp relay statistics command in the system view to clear the DHCP statistics.
----End
2.5.2 Monitoring the Running Status of DHCP
Context
In routine maintenance, you can run the following command in any view to view the running
status of DHCP.
Issue 02 (2009-08-06)
If the IP address of the DHCP server is specified, Release messages are sent to only the
–
specified DHCP server.
Run the ping ip-address command on the S9300. The command output indicates that the
IP address of the client cannot be pinged.
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 DHCP Configuration
2-7