Figure 2-2 Networking Diagram For Configuring The Dhcp Relay In A Super Vlan - Huawei Quidway S9300 Configuration Manual
Terabit routing switch v100r001c03
Hide thumbs
Also See for Quidway S9300:
- Configuration manual - network management (630 pages) ,
- Configuration manual (603 pages) ,
- Configuration manual - multicast (262 pages)
Table of Contents
Advertisement
Quidway S9300 Terabit Routing Switch
Configuration Guide - IP Service
Figure 2-2 Networking diagram for configuring the DHCP relay in a super VLAN
Super Vlan
VLANIF100
20.20.20.1/24
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Create a DHCP server group and add DHCP servers to the group.
# Create a DHCP server group.
<Quidway> system-view
[Quidway] dhcp server group dhcpgroup1
# Add DHCP servers to the DHCP server group.
Issue 02 (2009-08-06)
Internet
DHCP Relay
GE1/0/0
VLAN 101
sub-Vlan
Create a DHCP server group and add DHCP servers to the group.
Configure VLAN 100 as the super VLAN.
Configure VLAN 101 and VLAN 102 as sub VLANs.
Enable the DHCP relay function on the VLANIF interface.
Bind the VLANIF interface to the specified DHCP server group.
Name of the DHCP server group
IP addresses of the DHCP servers
Number of IP address of the interface enabled with the DHCP relay function
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/1
VLAN 102
sub-Vlan
2 DHCP Configuration
DHCP Server A
100.10.10.1/24
DHCP Server B
100.10.10.2/24
2-11
Advertisement
Table of Contents
