Configuring Forcible Fragmentation Of Outgoing Packets On An Interface; Setting Icmp Parameters - Huawei Quidway S9300 Configuration Manual

3 IP Performance Configuration
The interface is enabled to check the source IP addresses.
The S9300 only checks the source IP addresses of the packets sent from the interface to the CPU.
----End
3.2.3 Configuring Forcible Fragmentation of Outgoing Packets on
an Interface
Context
Do as follows on the S9300.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan
A VLAN is created.
Step 3 Run:
interface vlanif vlan-id
The VLANIF interface view is displayed.
Step 4 Run:
clear ip df
The interface is configured to delete the DF field.
By default, outgoing packets are not fragmented forcibly on an interface.
----End

3.2.4 Setting ICMP Parameters

Context
By default, the S9300 is enabled to send ICMP redirection packets and ICMP host unreachable
packets.
3-4
vlan-id
NOTE
The DF field is deleted from the packet sent from an interface; therefore, you need to configure this function
on an outgoing interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - IP Service
Issue 02 (2009-08-06)