Using Test Local Mode; Using Resume Normal Mode - Nortel 2001 User Manual

Local Mode
If the WAN connection goes down, the telephone loses communication
with the Main Office TPS. It then registers with the MG 1000B and
receives telephone services from the branch office. When in Local Mode,
the telephone displays "LOCAL MODE."

Using Test Local Mode

Use Test Local Mode to check local mode functionality (make and receive
telephone calls). This is useful when provisioning has changed for an
IP Phone on an MG 1000B Controller.
(Services)

Using Resume Normal Mode

Use the Resume Normal Mode command to return to Normal Mode after
testing survival functionality.
Note: If the Resume Normal Mode command is not performed after
testing, the telephone automatically returns to Normal Mode in ten
minutes.
(Services)
Services
1. Press the
Navigation
2. Press the
Test Local
highlight
Select
3. Press the
resets and registers to the MG 1000B).
Services
1. Press the
Services menu.
Additional phone features
key.
keys to scroll and
Mode.
soft key (the telephone
key to access the
69