Attaching To A Wall - Panasonic SC-HT60 Operating Instructions Manual

Other speaker setup options
Fitting optional speaker stands
e.g. Front and surround speakers
5mm, Pitch 0.8 mm
• Use the same screw type for the center speaker.
• The stands must be able to support over 10 kg.
• The stands must be stable even if the speakers are in a high position.

Attaching to a wall

Center speaker
SC-HT40
200 mm
SC-HT60
7.5 - 9.4 mm
3.0 - 4.0 mm
Front and surround speakers
SC-HT40
Wall or pillar
SC-HT60
Use new cables when attaching the speakers to the wall.
Secure the cover
1
at the bottom of
the speaker.
Fasten screws
SC-HT40
Wall or pillar
Press the speaker cable
2
into the groove.
white
white with blue stripe
Ensure that the screws
are securely positioned
when attaching the
speakers to the wall.
The wall or pillar on which the speakers are to be
attached should be capable of supporting 10 kg per
screw. Consult a qualified building contractor when
attaching the speakers to wall. Improper attachment
may result in damage to the wall and speakers.
335 mm
30 - 35 mm
7.5 -
9.4 mm
4 - 7 mm
3.0- 4.0 mm
Fix screws at 335 mm
3
apart onto the wall.
7