Panasonic SC-HT60 Operating Instructions Manual page 14

Control guide
Main unit
Standby indicator [^]
When the unit is connected to the AC mains supply,
this indicator lights up in standby mode and goes out
when the unit is turned on.
Standby/on switch [8]
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still consuming
a small amount of power.
Remote control signal sensor
[MUSIC PORT]
• You can playback sound from portable audio
equipment.
• Reduce the volume to minimum before connecting
and disconnecting the equipment.
• Use an audio cord for connection.
Display
[TUNED, ST, MONO]
Radio indicators
TUNED: A station is tuned
ST: A stereo FM broadcast is tuned
MONO: You have switched to monaural mode to
improve reception
General display
Shows the input mode, radio frequency and other
general information.
14
[-MENU, ―SETUP, RETURN]
• For entering menus to make
various settings.
• For returning to previous
menus.
MENU TUNE
SETUP ENTER
RETURN
MUSIC PORT
[ENTER]
Used during menu or setup
operations.
TUNED ST MONO
[kHz, MHz]
Frequency unit indicators
kHz: AM, or PCM sampling
frequency
MHz: FM
[TUNE, 3, 4]
For tuning the radio
and selecting menu
or setup items.
[SLEEP]
Sleep timer indicator.
SLEEP
[M]
F l a s h e s o r l i g h t s
during presetting.