CAUTION • The 963 is designed for use in those areas using AC 120V electrical service, while the 963E runs off of DC24V power, supplied by a universal power supply capable of converting AC 100-240V electrical service. Usage of either unit with the incorrect electrical voltage could result in incorrect performance and an unsafe operating condition.
As distance increases or fan speed is reduced, the discharge time will increase. The 963 requires AC 120V power and is supplied with a 6 ft. (1.8 m) power cord with North American style three- prong plug. The 963E requires DC...
4.2 Determine the location of an Section 6. appropriate electrical outlet. For Maintenance the 963, connect the power cord to the ionizer, and insert the other end Occasional cleaning of the case and of of power cable into the appropriate the emitter points are the only routine electrical outlet.
Performance Verification to allow for centering on the 711charge plate. If so, use a block of appropriate height to The 963/963E Benchtop Air Ionizers elevate the 711. Please note that are factory adjusted to provide the plate must be kept totally optimum performance.
Section 8. 963 Benchtop Air Ionizer Physical Characteristics Item Typical Properties 963E Power Ratings AC 120V 60 Hz 0.20 A 20 W DC 24V 0.42 A 10 W through included universal power transformer Power inlet IEC 320 Socket Mini DIN Socket Power Transformer Input: AC 100V-240V, 0.4A, 50/60 Hz...
3M Electronic Handling & Protection Division Customer Service: (800) 328-1368 Technical Support: (512) 984-3200 Outside of the U.S. : For customer service and technical support, please contact your local representative of the 3M Electronic Handling & Protection Division.
Page 10
3M receives notice during 3M or Seller be responsible or liable the warranty period. Defective products for special, incidental, or consequential must be returned to 3M with proof of losses or damages, whether based in purchase date. tort or contract. Fulfillment of 3M’s warranty obligations will be Customer’s...