6
en | Installation
2
Installation
2.1
Installation Preparation
This section contains a general installation procedure and refers to other sections of the
document for detailed instructions. Review this document and the D9412GV4/D7412GV4
Program Entry Guide (P/N: F01U265459) before beginning the installation to determine the
hardware and wiring requirements for the features used. Refer to the documents listed below
for additional information:
–
–
2.2
Enclosure Options
Mount the control panel assembly in any of the enclosures listed below:
–
–
–
Refer to the Approved Applications chapter inside the D9412GV4/D7412GV4 v2.03 Installation
and System Reference Guide (P/N: F01U265457) to determine if the application requires a
specific enclosure.
2.3
Mounting Enclosure
1.
2.
3.
2016.07 | 04 | F.01U.291.483
D9412GV4/D7412GV4 v2.03 Installation and System Reference Guide (P/N: F01U265457)
D9412GV4/D7412GV4 v2.03 Owner's Manual (P/N: F01U287176)
D8103 Universal Enclosure (tan)
D8109 Fire Enclosure (red) for the D9412GV4 and D7412GV4 Control Panels
D8108A Attack Resistant Enclosure (tan)
Run the necessary wiring throughout the premises.
Mount the enclosure in the desired location. Use all five enclosure mounting holes. Refer
to the diagram for mounting locations and descriptions.
Pull the wires into the enclosure.
UL Installation Guide
Bosch Security Systens, Inc.