Remington MB4030 User Manual page 4

ENGLISH
Note:
Trimmer comb must be attached to the product in
order to use the hair length selector.
,To thin and taper beards/ moustaches
• Attach an attachment comb to the 30mm Trimmer Blade.
• Use the zoom wheel to set the trimmer comb to the desired
length setting. The setting will appear on the length
position indicator. If you are trimming for the first time start
with the maximum trimming length setting
• Turn the unit on.
• Place the flat top of the trimmer comb against the skin
• Slowly slide the trimmer through the hair. Repeat from
different directions as necessary.
• If hair builds up in the trimmer comb during the trimming
process, switch the unit off, pull off the comb and brush/
rinse off
,To define the beard/moustache line
• Hold trimmer with 30mm Trimmer Blade facing you.
• Remove the trimmer comb attachment
• Start with edge of beard/moustache line and gently lower
the trimmer blade onto your skin. Use motions towards
edge of beard/moustache line to trim to desired locations in
facial area and away from beard in neck area.
• For finer shaping, raise the pop-up trimmer. Shape as
desired.
6
ENGLISH
C BLADE RELEASE
• Remove the adjustable comb.
• Push the release button on the back of the product.
• Blade will release itself from its housing.
• Remove the blade from the housing.
• To replace the blade, make sure the blade is aligned and
the grooves on the blade cartridge match up with slots in
the housings.
• Push the blade into the housing until it snaps into place.
C REPLACING THE TRIMMER COMB
• Hold the trimmer in one hand with your thumb firmly on
the zoom wheel to keep it from turning. Ensure that the
length position indicator is at 1.
• Slide the comb/shaver down the grooves until it clicks into
place.
Note: The trimmer comb attachment can only be placed on
the trimmer one way; if it does not fit properly remove and
reverse it.
Tips for best results
E
• Beard, moustache and sideburn hairs should be dry.
• Avoid using lotions before using your trimmer. Comb your
hair in the direction that it grows.
• Remove trimmer comb attachment if you are: defining
hairline edges such as sideburns, trimming the nape of
your neck, trimming your beard line on front of neck.
7