Factory Default Settings - Juniper SRX300 How To Set Up

Gather Configuration Information
Gather information about your network and the configuration settings that you
will use to configure the device.
Required
Device name
Root authentication
Optional
NTP server name or IP address
Licenses
Internet zone
Static IP or Dynamic IP (provided by ISP)
Port number
DMZ
Network IP address
Port number
Internal zone
Zone name
Network IP address
Port number
DHCP server
Security policies
Remote client IP pool range
Source NAT
Internal zones for which source NAT has been added
IP address or hostname
Factory-Default Settings
Security Policies
Source Zone
trust
trust
untrust
NAT Rules
Source Zone
trust
Interfaces
Port Label
0/0
0/1
0/2
0/3
0/4
0/5
Initial Configuration Process
Connect the
Grounding Cable
(Optional)
Verify the
Settings
How to Set Up Your SRX300 Services Gateway
Destination Zone
untrust
trust
trust
Destination Zone
untrust
Interface Security Zone DHCP State
ge-0/0/0 untrust
ge-0/0/1 trust
ge-0/0/2 trust
ge-0/0/3 trust
ge-0/0/4 trust
ge-0/0/5 trust
Connect the
Power On
Management
the Device
Device
Configure
Log in
Using Guided/
to J-Web
Default Setup
Policy Action
permit
permit
deny
Policy Action
Source NAT to untrust zone
interface
IP Address
Client Dynamically
assigned
Server 192.168.1.1/24
Server 192.168.2.1/24
Server 192.168.3.1/24
Server 192.168.4.1/24
Server 192.168.5.1/24
2