Preparation For Disassembly - Compaq Presario 7360 Maintenance And Service Manual

Product Description
Home Removal & Replacement
REMOVAL & REPLACEMENT
DISASSEMBLY
SEQUENCE

Preparation for Disassembly

Electrostatic
Discharge
To prepare the computer for removal and replacement procedures, complete the following steps:
Service
Considerations
1 Remove any diskette, compact disc, or tape from the computer.
2 Turn off the computer and any peripheral devices that are connected to the
Preparation
computer.
for
Disassembly
Serial Number
Chassis Cover
3 Disconnect the power cord from the electrical outlet, and then from the
Fax-Modem
computer.
Mass Storage
4 Disconnect all peripheral device cables from the computer.
Devices
System Board
and
Components
Power Supply
Maintenance and Service Guide
Compaq Presario 7300 Series Computers
CAUTION: The computer power switch should
be turned off before you disconnect any cables.
IMPORTANT: During disassembly, label each cable as you remove
it. Be sure to note its position and routing.
Troubleshooting
Jumper & Switch Information
Illustrated Parts Catalog
Specifications