Ribbon Setting; Setting The Media Sensor Type - SATO CL4NX Operator's Manual

2.7.8

Ribbon Setting

Load the ribbon.
*Shows if you have selected Use Ribbon in the print
method setting.
You can check the setting method of the ribbon
through the video. Press the
video.
Press the button to stop the video and return to
the previous screen.
After you complete the ribbon setting, press the right
soft button to go to the next screen.
2.7.9

Setting the Media Sensor Type

Set the type of sensor for sensing the media.
The options are as follows:
• None: Disable the media sensor.
• Gap: Use the transmissive type sensor.
• I-Mark: Use the reflective type sensor.
Select the media sensor type using the
buttons, then press the right soft button or
button to confirm.
button to watch the
/
2 Installing the Printer
CL4NX/CL6NX Operator Manual
29