5
Install the new platen roller. Make sure
that the first tab on the driving end of
the platen roller is pointing upward. Then
push the platen roller in the direction
so that the first tab is fixed in the
groove at the driving side.
6
Next, make sure that the second tab
on the driven end of the platen roller is
pointing upward. And then push the
platen roller again in the direction
that the second tab is fixed in the
groove at the driven side.
7
Turn the lever back to lock the platen
roller.
7.4.1
Guideline to Replace the Linerless Platen Roller (CL4NX only)
The linerless platen roller has a blue striped marking
on the left side. When the blue striped marking started
to fade off, it indicates that you should replace the
linerless platen roller.
This is only a general guideline, the condition of the
platen roller wears out varies depending on the used
media. In any cases, replace the worn platen roller
when it affected the printing quality of the printer.
3
so
3
7 Appendix
5
3
7
4
CL4NX/CL6NX Operator Manual
4
6
2
267