Menu System Configuration - Sony J-10 Manual

7-1 Menu System Configuration

The principal setup operations required before
operating this unit can be carried out using setup
menus.
The menu system of this unit is comprised of a basic
menu and an extended menu.
• Basic menu
This menu is used to make the following settings:
– the digital hours meter
– the character information superimposed on the
output to the monitor
– settings for switching between the 525 (NTSC) and
625 (PAL) systems
– settings for the menu banks for retaining menu
settings
Setup Menu
• Extended menu
This menu is used to make the following wide range
of settings on this unit:
– the control panel functions
– tape protection
– video and audio control
– digital data processing
This unit allows up to two menu settings to be stored
in menu banks 1 and 2.
The stored menu settings can be called up to use as
required.
For more information, see "Menu bank operations (basic
menu items B01 to B12)" on page 7-5 (GB).
7
Chapter
7-1
Chapter 7 Setup Menu (GB)