Menu Operations - Sony J-10 Manual

7-2 Menu Operations

7-2 Menu Operations
This section describes the basic menu displays and
how to change the settings.
For information about how to use basic menu item 013, see
"Switching between 525/625 line systems (basic menu item
013)" on page 7-4 (GB), and for information about how to
operate items B01 to B12, see "Menu bank operations
(basic menu items B01 to B12)" on page 7-5 (GB).
For information about how to use the extended menu, see
the section "Extended menu operations" on page 7-6 (GB).
Displaying the menus
SHIFT button
Time data display area
SET/MENU button
Press the SET/MENU button while holding down the
SHIFT button.
The setting of the currently selected menu item
appears in the time data display area.
Item number
(flashing)
Displaying the menus on the monitor
Menu setting can be done on the monitor while
superimposing is set to ON.
7-2
(GB) Chapter 7 Setup Menu
Item name (first four
characters)
Cursor indicating
*HO1:OPE HOURS
HO2:DRUM HOURS
the currently
selected item
If the SET/MENU button is pressed while holding
down the SHIFT button to display the menu settings in
the time data display area, a full-screen version also
appears on a monitor connected to the COMPOSITE
(SUPER) output connector, SDI (SUPER) output
connector (J-10SDI/30SDI only), or DV connector as
shown in the above figure.
Changing the currently displayed menu
item
JOG/SHTL indicator
Turn the JOG/SHUTTLE dial.
Turning the JOG/SHUTTLE dial to the right
increments the item number and turning it to the left
decrements the item number.
The item number changes at a rate depending on the
JOG/SHUTTLE dial position (when the SHTL
indicator is lit) or on the JOG/SHUTTLE dial rotation
rate (when the JOG indicator is lit).
- 102
- 52
JOG/SHUTTLE button
JOG/SHUTTLE dial