Connector Panel; Connector Panel Of The J-10/30 - Sony J-10 Manual

2-2 Connector Panel

2-2-1 Connector Panel of the J-10/30

6 AUDIO MONITOR
1 AC IN connector
Connects to an AC outlet using the power cord (not
supplied).
2 RS232C (RS-232C serial interface) connector
(D-sub 9-pin)
Used to remote-control this unit from an external
device provided with a Sony 9-pin remote control
interface.
3 REMOTE IN (9P) connector (RS-422A serial
interface, 9-pin)
Used to remote-control this unit from an external
device provided with a Sony 9-pin remote control
interface.
4 EXT SYNC (external synchronization) input
connector
Inputs the reference video signal. However, on this
unit, use this for frame synchronization only, not for
color subcarrier synchronization.
2-8
(GB) Chapter 2 Location and Function of Parts
5 VIDEO OUTPUT
OUTPUT connectors
3 REMOTE IN (9P) connector
4 EXT SYNC input connector
connectors
5 VIDEO OUTPUT connectors
COMPOSITE (analog composite video) (SUPER)
output connector (phono jack): Outputs an analog
composite video signal. When basic menu item
005, DISPLAY INFORMATION SELECT, of the
setup menu is set as anything other than OFF, the
output from this connector outputs superimposed
character information such as time code, menu
settings, or alarm messages.
COMPOSITE (analog composite video) (SUPER)
output connector (BNC): Outputs an analog
composite video signal. When basic menu item
005, DISPLAY INFORMATION SELECT, of the
setup menu is set as anything other than OFF, the
output from this connector outputs superimposed
character information such as time code, menu
settings, or alarm messages.
S VIDEO output connector (Mini-DIN 4-pin):
Outputs an S VIDEO signal.
1 AC IN connector
2 RS232C connector