Setting The Canal Plus Decoder (Not Available On Slv-Se620N); Basic Operations - Sony SLV-SE220 Service Manual

Setting the Canal Plus decoder
(not available on SLV-SE620N)
You can watch or record Canal Plus programmes if you connect a decoder (not
supplied) to the VCR.
Connecting a decoder
Cana! Plus
Scart cable
{not supplied) decoder
=a
f Ss =
LINE-3 (DEC/EXT)" or cart
LINE-2 (DEC/EXT)? ({EURO-AV)
ee
f= TI)
LINE-1 (EURO AV)
Scart cable (not supplied)
c= : Signal flow
Setting Canal Plus channels
To watch or record Canal Plus programmes, set your VCR to receive the channels
using the on-screen display.
In order to set the channels correctly, be sure to follow all of the steps below.
Before you start...
* Turn on the VCR, the TV, and the decoder.
* Set the T'V to the video channel.
* Reter to "Index to parts and controls" for button locations.
36 | Setting the Canal Pius decoder (not available on SLV-SE620N)
6 Press MENU to exit the menu.
(MENU
O
Notes
* To superimpose subtitles while watching Canal Plus programmes, make both
decoder-VCR and VCR-TY connections using 21-pin Scart cables that are
companble with the RGB signals You cannot record subtitles on the VCR.
¢ When you watch Canal Plus programmes through the RFU input of the TV, press
—D TV/VIDEO so that the VIDEO indicator appears in the display window.
*' SLV-SE820N only
*?SLV-SE720N, SX720N and SE420K only
38 Setting the Canal Plus decoder (not available on SLV-SE620N)
Press MENU, then press tite
=> to highlight INSTALLATION 'an 9
@) and press OK. auto ser ve.ccenmwinttiatiitie|
MANUAL SET UP. 3
AR ¢ 2
9
BET <> a
ExIT
2 Press #/% to highlight MANUAL
ARQ) SET UP. then press =.
OFF
OFF
OFF
033 OFF
SWAPPING : OK
LCLEAR EXIT: MENU
Press 4. to highlight the row
Ew) which you want to set for the
(=) decoder. then press =.
CS To display positions 6 to 80, press ST
TF repeatedly. OFF
SELECT -a¥ Set -
END OK EXIT: MENU
4 Press #/$ to highlight DECODER.
SS
To:
OK EXIT ; MENU
5 Press = to set DECODER to ON,
©) then press OK.
SELECT : av SET
END 0K EXIT MENU
CONTINUED wwmnnnuasanen
Setting the Canal Pius decoder (not available on SLV-SE620N) | 37
Basic Operations
Playing a tape
Before you start...
* Refer to "index to parts and controls" for button locations.
-_
Turn on your TV and set it to the video channel.
Insert a tape.
The VCR tums on and starts playing
automatically if you insert a tape with
its safety tab removed.
N
3 Press D> (play).
Ke) When the tape reaches the end, it will rewind automatically.
SS
suoneledgo sseg E
Additional tasks
Stop play
B (stop)
Pause play HE (pause)
Resume play after pause
W (pause) or [> (play)
Fast-forward the tape ®P (fast-forward) during stop
Rewind the tape "44 (rewind) dunng stop
S (eject)
continued
Playing a tape | 39