Setting The Dialing Mode - Panasonic KX-FP200 Operating Instructions Manual

Setting the dialing mode

The unit will automatically set the dialing mode to TONE or PULSE when the unit is turned on if this feature is
set to AUTO.
If you cannot dial, change the dialing mode setting to TONE or PULSE by following the instructions below.
Press (MENU).
1
Display:
K A C
2
Press , then
Press (START/COPY/SET).
3
4
Press or to select the desired setting.
Press (START/COPY/SET).
5
Press (MENU).
6
Note:
¡If you change the dialing mode setting to TONE or PULSE, set the dialing mode again when you change the
line service.
Changing the logo print position
The logo, telephone number, date, time and page number will be printed on the transmitted document from
your unit in the following manner.
OUT: Outside of the transmitted document's paper size (pre-selected setting).
IN: Inside of the transmitted document's paper size.
Press (MENU).
1
Display:
K B A
2
Press , then
Press (START/COPY/SET).
3
4
Press or to select the desired setting.
Press (START/COPY/SET).
5
Press (MENU).
6
46
SYSTEM SET UP
.
DIALING MODE
Ÿÿ
MODE=AUTO [
SYSTEM SET UP
.
LOGO POSITION
Ÿÿ
MODE=OUT [
Dial keypad
1 2 3
4 5 6
7 8 9
0
]
(START/COPY/SET)
Dial keypad
1 2 3
4 5 6
7 8 9
0
]
(START/COPY/SET)
(MENU)
(MENU)