Quick Start
Installation
Remove the shipping tape from the unit and stacker, and install as follows.
Film cartridge
1
A.
Slide the cover open lever forward.
B.
The cover is under tension to improve print quality.
Pull up hard enough to open.
C.
Remove the leaflet from the unit.
D.
If the film in the film cartridge is slack, tighten it by
winding the bottom side gears.
Incorrect
E.
Install the film cartridge into the unit.
F.
Make sure that the blue label on the cartridge
matches the one on the unit.
G.
Close the cover securely by pushing down on
both corners.
Blue labels
4
Shipping tape
(See page 20.)
Correct
Tight
Blue gear
For Assistance, Call 1-800-435-7329
Shipping tape
Cover
Blue label
Bottom
side gears
Cover open
lever
Leaflet