Start-Up; General Safety Information - Siemens SIMOTRAS 6SG7050 Operating Instructions Manual

01.04
7

Start-up

7.1 General safety information for start-up
DANGER
Before commencing with start-up on the converters, make sure that the transparent terminal
cover is mounted in the correct position (see Section 5.1).
CAUTION
Before handling any boards (in particular, the A7001 electronics board), please make sure that
your body is electrostatically discharged to protect electronic components against high voltages
caused by electrostatic charges. The simplest way of doing this is to touch a conductive, grounded
object (e.g. bare metal cabinet component immediately beforehand).
PCBs must not be allowed to come into contact with highly insulating materials (e.g. plastic foil,
insulating table tops or clothing made of synthetic fibres).
PCBs may only be set down on electrically conducting surfaces.
SIEMENS AG 6SG7000-0BA76
SIMOTRAS HD Operating Instructions
Start-up
7-1