Connections
6.7.3
Terminal description
WARNING
The converter might sustain serious or irreparable damage if connected incorrectly.
The power cables and/or busbars must be secured mechanically outside the converter.
Power section
D400 / 60 -180 Mre converters
D400 / 225 -360 Mre converters
D400 / 525 -680 Mre converters
D400 / 900 Mre converters
The converters are designed for a permanent power supply connection according to DIN VDE 0160
Section 6.5.2.1.
PE conductor connection: Minimum cross-section 10mm
The connection cross-sections must be determined according to the applicable regulations, e.g.
DIN VDE 100 Part 523, DIN VDE 0276 Part 1000.
Function
Supply input
PE conductor
Motor connection
6-30
Terminal type:
U1, V1, W1: Through-hole for M8 (3x20 copper bus)
U2, V2, W2: Through-hole for M8 (5x20 copper bus)
U1, V1, W1: Through-hole for M10 (5x30 copper bus)
U2, V2, W2: Through-hole for M10 (5x35 copper bus)
Through-hole for M12 (5x60 copper bus)
U1, V1, W1: Through-hole for M12 (10x60 copper bus)
U2, V2, W2: Through-hole for M12 (10x50 copper bus)
2
Connection values/Remarks
Terminal
U1 (L1)
V1 (L2)
W1 (L3)
see technical data in Section 3.4
U2 (T1)
V2 (T2)
W2 (T3)
. (see Section 5.1 for connection options).
SIEMENS AG
SIMOTRAS HD
01.04
6SG7000-0BA76
Operating Instructions