Sending Scpi Commands Via The Web Interface - Agilent Technologies 34980A User Manual

Sending SCPI Commands Via the Web Interface

The Web Interface provides a utility to send SCPI commands to the
34980A via the SCPI Command Interface window. The procedure below
shows how to access this window and send commands.
1
2
Agilent 34980A Mainframe User's Guide
You must be in the Allow Full Control mode to send instrument
NOT E
commands to the 34980A.
Press the
Commands
page to launch the SCPI Command Interface window.
The SCPI Command Interface window allows you to:
Set the time to wait for a command response from the instrument.
a
2a
button at the top of the Web Browser Control
1
2
Getting Started
59