Declaration Of Conformity; Restricted Rights Legend; Safety Notices; Technology Licenses - Agilent Technologies 34980A User Manual

Notices
© Agilent Technologies, Inc. 2004-2012
No part of this manual may be reproduced
in any form or by any means (including
electronic storage and retrieval or transla-
tion into a foreign language) without prior
agreement and written consent from 
Agilent Technologies, Inc. as governed 
by United States and international copy-
right laws.
Manual Part Number
34980-90005
Edition
Seventh Edition, March 2013
Printed in Malaysia
Agilent Technologies, Inc.
3501 Stevens Creek Blvd 
Santa Clara, CA 95052 USA
Microsoft® and Windows® are U.S. reg-
istered trademarks of Microsoft Corpora-
tion.
Software Revision
This guide is valid for the firmware that
was installed in the instrument at the time
of manufacture. However, upgrading the
firmware may add or change product 
features. For the latest firmware and 
documentation, go to the product page at:
www.agilent.com/find/34980A
ii

Declaration of Conformity

Declarations of Conformity for this
product and for other products may
be downloaded from the Web. Go to
http://regulations.about.keysight.com/
DoC/search.htm. You can then search
by product number to find the latest
Declaration of Conformity.
Warranty
The material contained in this doc-
ument is provided "as is," and is
subject to being changed, without
notice, in future editions. Further,
to the maximum extent permitted
by applicable law, Agilent disclaims
all warranties, either express or
implied, with regard to this manual
and any information contained
herein, including but not limited to
the implied warranties of mer-
chantability and fitness for a par-
ticular purpose. Agilent shall not
be liable for errors or for incidental
or consequential damages in con-
nection with the furnishing, use, or
performance of this document or of
any information contained herein.
Should Agilent and the user have a
separate written agreement with
warranty terms covering the mate-
rial in this document that conflict
with these terms, the warranty
terms in the separate agreement
shall control.

Technology Licenses

The hardware and/or software described
in this document are furnished under a
license and may be used or copied only in
accordance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. 
Software and technical data rights granted
to the federal government include only
those rights customarily provided to end
user customers. Agilent provides this 
customary commercial license in Soft-
ware and technical data pursuant to FAR
12.211 (Technical Data) and 12.212
(Computer Software) and, for the Depart-
ment of Defense, DFARS 252.227-7015
(Technical Data - Commercial Items) and
DFARS 227.7202-3 (Rights in Commer-
cial Computer Software or Computer
Software 
Documentation).

Safety Notices

CAUTION
A CAUTION notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly per-
formed or adhered to, could result
in damage to the product or loss of
important data. Do not proceed
beyond a CAUTION notice until
the indicated conditions are fully
understood and met.
WA RNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice,
or the like that, if not correctly
performed or adhered to, could
result in personal injury or
death. Do not proceed beyond a
WARNING notice until the indi-
cated conditions are fully
understood and met.
Agilent 34980A Mainframe User's Guide