Other - EverFocus PARAGON FHD 16x4 User Manual

PARAGON FHD 16x4
6.4.4

Other

You can configure the event settings and enable the Buzzer or Email alert for notifications.
The event options include: Disk Temperature, Disk Failure, Disk Full, Disk Off, Power Loss
and Network Loss.
6.4.4.1 Disk Temperature.
Log: Check the box to record alarm events to log data.
Buzzer: Check the box to enable buzzer when System / Hard Disk's (HD) temperature is over
the "Temp. Warning Limit".
Email Notify: Check the box to send email notification when system / Hard Disk's (HD)
temperature is over the "Temp. Warning Limit". Email operation requires valid email entered
in the Email setup menu (see 6.7.2 Email).
Network Alarm: Check the box to send out a network alarm to a client PC. This feature works
with EverFocus' CMS software. You will need to configure the Alarm Server for the DVR to
send network alarms to the client PC (see 6.7.5 Alarm Server).
Stop Recording: Check box to stop recording when System / HD's temperature is over the
"Temp. Warning Limit".
Temp. Warning Limit: Sets the trigger temperature for System / HD Temperature event
actions. Choose between 45°C /113°F and 70°C /158°F.
Alarm Output: Select an alarm output number. When an alarm is triggered, the signal will be
transmitted through the selected alarm output relay.
Output Type: Output action will be Transparent and cannot be changed (alarm output
remains as long as the alarm condition is active).
Save: Click to save the settings.
86